Equipment Specifications:
Product Model | Product Model | |||
Lasers | Imported from Germany | |||
Laser wavelength | 532nm | |||
Maximum laser output power | 30W | |||
Maximum Repetition Frequency | 100KHZ | |||
Laser pulse width | 6ns | |||
Laser beam quality | ≦ 1.2 | |||
Laser spot diameter | 3 mm | |||
Spot dispersion angle | <2mrad | |||
Cooling method | Water cooling | |||
Cooling system | Parametric | |||
Refrigerants | Softened water + additives | |||
Cooling temperatures | 23°C | |||
Difference in temperature | +/- 1°C | |||
Requires cooling capacity | 2KW | |||
Flow rate | 10 1/min | |||
Strains | 5 bar -8 bar | |||
Addressees:
Sports event | Technical parameters | |||
Makings | Nylon | |||
Panel size | 500mm *300 mm | |||
Processing type | Perforation/segmental cutting | |||
Process capability:
Position accuracy | 士0.02mm | |||
Repeat Positioning Accuracy | 士0.05mm | |||
XY Effective processing area | 500mm *300 mm | |||
Z-axis travel | 1 0mm | |||
Drive method | Servomotor Ten Dynamic Focus | |||
Positioning method | Mechanical positioning + CCD automatic positioning | |||
Processing time | 10mm@ H3mm Duration 8s | |||
Perforation effect | Scratch-free glass, chipping less than 100um | |||
Product Yield | 99.5%以上 | |||
Principle and Function
The laser beam can be focused into a spot of Φ0.01mm or smaller through the optical system, obtaining an energy density of 10 8W/cm²~10 10W/cm² and a local high temperature of 10,000℃, which will make the processed material melt, gasify or chemically change rapidly, and the melted material will be ejected in the form of a shockwave, so as to achieve the cutting, engraving or perforation.
Proofing samples: