Buy fibre laser cutting machine to pay attention to these points

First, the power is enough
The power of the fibre laser cutting machine is 1000W, 1500W, 2000W, 3000W, 6000W and so on. The higher the power, the more expensive. Generally speaking, for the most common metal materials, 3000W is enough, but you can't buy 6000W just because you want to save money. you need to sample in advance and choose the right power according to the material hardness of your product.
Laser cutting machine on copper foil, copper film and other ultra-thin metal alloys. The UV cold light source makes the heat affected area small, small processing gap, no carbonisation and burr on the edge, smooth edge, and no effect on the shape of copper foil. In practical applications, it is required to remove the copper on the surface of PET film to form a conductive map, and it is required to remove it cleanly without residue, otherwise it will affect the conductivity, and it will not hurt the PET film. Conventional infrared light source or green light source in the application of a variety of problems, and the application of ultraviolet picosecond laser cutting machine heat-affected zone using infrared or green light source processing of such materials in the process of either injuring the PET film, or will be not clean enough to clean up the copper, resulting in the appearance of a short circuit. The benefits of using ultraviolet laser cutting mode is to control the process means, so that it is processed after the surface of the copper thermal impact of small does not hurt PET, in addition, through the process of the lower part of the light directly through the PET does not cause burns, to achieve perfect cutting.

Second, fast speed
We choose the purpose of the fibre laser cutting machine because it is fast enough, that is, to focus on processing efficiency. Start under the premise of power can reach the standard, can be as fast as possible, need to take into account the service life of the machine. One of the important aspects is the configuration of the machine's operating parameters. Manual low speed and manual high speed affect the speed at which the machine will run in manual mode. These speeds should be based on the overall performance of the laser cutting machine and the hardness of the material to be processed comprehensive consideration, try to set a larger, in order to improve efficiency.

Third, precision
Fibre laser cutting machine cutting accuracy is related to many factors, but most of the main factors related to the following.
1, laser: imported laser cutting accuracy is higher, domestic can meet the basic requirements of the national marking.
2, laser cutting machine assembly technology: the precision of the fibre laser cutting machine is mainly related to the assembly technology of the technicians.

Fourth, after-sales
Regardless of the purchase of any product, there is a need for after-sales service, high-quality after-sales service reflects this common reputation and brand image, the big brand is trustworthy.